Guangzhou Kunyuan Auto Parts Co.,Ltd
E-mail:gzkyfordautoparts@yahoo.com
Contact US
Address: No.718, San Yuan Li Avenue, No.113, E-Sing Building, Baiyun District, Guangzhou City, Guangdong, China
Contact: Amber Yang
TEL: +86-13763387839
Home > News > Content
Introduction And Working Principle Of Brake Pad
- Aug 16, 2017 -

     The brakes are also called brake pads. In the car's braking system, the brake pads are the most critical safety parts, all of the brake effect is the brake pads play a decisive role, so good brake pads are people and cars protection God. Brake Pads (brake decision) are generally composed of steel plate, bonding insulating layer and friction block, the steel plate should be coated to rust, coating process with the SMT-4 temperature tracking instrument to detect the coating process to ensure quality. The insulating layer is composed of non heat-transfer materials with the aim of heat insulation. The friction block is composed of friction material and adhesive, which is squeezed on the brake disc or brake drum to produce friction, so as to achieve the goal of vehicle deceleration brake. Because of the friction, friction blocks will gradually be worn, generally speaking, the lower the cost of the brake pads wear faster.Brake Pad
     The brakes work mainly from friction, using brake pads and brake discs (drums) and tires and ground friction to convert the kinetic energy of the vehicle into a friction heat, stopping the car.Brake Pad
     A good efficient braking system must provide a stable, sufficient, controllable braking force, and has good hydraulic transmission and heat dissipation ability to ensure that the force of the driver from the brake pedal can be fully and effectively transmitted to the total pump and the pump, and avoid the high fever caused by hydraulic failure and brake decay. The braking system on the car is divided into two categories: disc and drum, but in addition to the advantages of cost, drum brakes are far less efficient than disc brakes, so the brakes discussed will be mainly disc brakes.Brake Pad
     Brake pads are generally composed of steel plate, bonding insulation layer and friction block, the steel plate should be coated to rust, coating process with the SMT-4 temperature tracking instrument to detect the coating process to ensure quality. The insulating layer is composed of non heat-transfer materials with the aim of heat insulation. The friction block is composed of friction material and adhesive, which is squeezed on the brake disc or brake drum to produce friction, so as to achieve the goal of vehicle deceleration brake. Because of the friction, friction blocks will gradually be worn, generally speaking, the lower the cost of the brake pads wear faster.Brake Pad