Guangzhou Kunyuan Auto Parts Co.,Ltd
E-mail:gzkyfordautoparts@yahoo.com
Contact US
Address: No.718, San Yuan Li Avenue, No.113, E-Sing Building, Baiyun District, Guangzhou City, Guangdong, China
Contact: Amber Yang
TEL: +86-13763387839
Home > News > Content
The Structure And Principle Of Brake Pads
- Jun 08, 2017 -

    Brake pads are also called brake pads. In the car's braking system, the brake pads are the most critical safety parts, all the braking effect is good or bad brake pads play a decisive role, so that good brake pads are the protection of God and the car.Brake Pad

    The brake pads are usually made of steel plate, adhesive insulation layer and friction block. The steel plate is painted to rust, and the coating process is used to check the temperature distribution of the coating process with SMT-4 furnace temperature tester to ensure the quality. The insulation layer is composed of non-heat transfer material, the purpose is to heat.Brake Pad

    The friction block is composed of friction material, adhesive, brake is squeezed in the brake disc or brake drum on the friction, so as to achieve the purpose of vehicle deceleration brake. Due to friction, the friction block will gradually be worn, in general, the lower the cost of the brake pads wear faster.Brake Pad

    Automotive brake pads are of the type: - Brakes for disc brakes - Brake shoes for drum brakes - For use in large trucks, the brake pads are divided into the following categories: Asbestos brake pads (basic Out), semi-metal brakes, less metal brakes, NAO formula brakes, ceramic brakes, NAO ceramic brakes.Brake Pad

    The working principle of the brake is mainly from the friction, the use of brake pads and brake discs (drums) and tire and ground friction, the vehicle's kinetic energy into the friction after the heat, the car stopped. A well-established braking system must be able to provide a stable, adequate, controllable braking force and a good hydraulic transmission and cooling capability to ensure that the force applied by the driver from the brake pedal is fully effective And the sub-pump, and to avoid high heat caused by hydraulic failure and brake recession.

    The replacement of the brake pads depends on how long your gasket has been used in your car life. Generally if you have to exercise more than 80,000 km away when the brake pads need to be replaced. But if you hear from your wheel friction sound, no matter how much mileage you have, you should replace the brake pads. If you have not yet grasped how many kilometers you have exercised, you may go to the store for free replacement mats, buy brake pads from them or install them in a car service shop.