Guangzhou Kunyuan Auto Parts Co.,Ltd
Contact US
Address: No.718, San Yuan Li Avenue, No.113, E-Sing Building, Baiyun District, Guangzhou City, Guangdong, China
Contact: Amber Yang
TEL: +86-13763387839
Home > News > Content
Advantages And Main Classification Of Rubber Shock Absorber
- Sep 15, 2017 -

     The advantages of rubber shock absorber: can determine the shape freely, by adjusting the composition of the rubber formula to control the hardness, it can satisfy the requirement of the stiffness and strength of each direction, the internal friction is big, the damping effect is good, it is advantageous to pass over the resonant zone, attenuate the high-frequency vibration and the noise, the elastic modulus is much smaller than the metal, which can produce Easy to maintain, small in quality, easy to install and disassemble. The impact stiffness is higher than the static stiffness and dynamic stiffness, which is advantageous to the impact deformation.Shock Absorber

     Rubber shock absorber Main kinds of introduction: rubber shock absorber According to its function classification is as follows: supporting a variety of devices in the narrow sense of rubber shock absorber, to absorb impact for the purpose of rubber buffers, as mechanical components used rubber springs, the elimination of specific vibration frequency vibration shock absorber; rubber couplings are also included in the rubber shock absorber category.Shock Absorber

     Rubber shock absorbers are narrowly classified by shape as follows: This type is mainly used in compression direction of rubber shock absorber. Its advantage is that the load endurance is large, but the elasticity coefficient of the compression direction is not too low. Shock Absorber

     This class is the rubber shock absorber which is mainly used in shearing direction. The load tolerance is small, but it has the advantage of small elasticity coefficient. It is a rubber shock absorber for compressing and shearing, which has the intermediate characteristics of compression type and shearing type. This type of rubber shock absorber can be used to reduce vibration of axial, axial, twist and pry. The axial vertical direction is similar to the compression type rubber alkali oscillator, and its load tolerance is generally larger, but the elasticity coefficient is not too small.Shock Absorber

     In suspension system, because of the vibration of the elastic element, in order to improve the ride comfort of the vehicle, in parallel with the elastic elements in the suspension and the damper, in order to attenuate the vibration, the automobile suspension system uses the damper mostly the hydraulic shock absorber, its working principle is when the frame (or the body) and the axle between the vibration appeared relative motion, The piston in the shock absorber moves up and down, and the oil in the shock absorber cavity flows from one cavity to another in a different cavity.Shock Absorber